simulink报错问题仿真时出现Complex signal mismatch.Output port 1 of 'untitled/M-PSK Modulator Baseband' is a signal of numeric type complex. However, it is driving a signal of numeric type real是什么意思?

simulink报错问题仿真时出现Complex signal mismatch.Output port 1 of 'untitled/M-PSK Modulator Baseband' is a signal of numeric type complex. However, it is driving a signal of numeric type real是什么意思? simulink仿真中的问题我在用MATLAB中的SIMULINK做仿真时出现以下错误提示,Trouble solving algebraic loop containing 'chap5_1sim/TmpHiddenBuffer_Feeding_S-Function_AtInput1' at time 3400. Stopping simulation. There may be a singula 关于matlab/simulink仿真过程出现的问题!仿真时出现仿真诊断“Derivative input 1 of 'wenya_filer/Transfer Fcn'（文件名） at time 0.2686788627406385 is Inf or NaN.Stopping simulation.There may be a singularity in the solution.If Simulink常微分方程建模仿真问题 simulink仿真中出现下面的错误,啥意思? MATLAB/Simulink仿真时出现下面的问题,Failed to find library 'arc_model' referenced by 'untitled/Modified Mayr arc model/DEE1'. This library must be on your MATLAB path simulink 仿真时 一阶延迟过程怎么表示 为什么simulink仿真时,设置时间30s,但前10s部分仿真不出来? matlab/simulink仿真出现错误,下图是我模型中的其中一个模块,在单独测试时出现图中的问题,不知道是不是跟代数环有关,最好给出解决方案.原图是下面的这个图,上图是我化简了.但出现同样的问 simulink仿真问题在simulink仿真中总是出现Using a default value of 0.2 for maximum step size.The simulation step size will be limited to be less than this value.You can disable this diagnostic by setting 'Automatic solver parameter selectio 模糊PID控制器matlab simulink仿真的问题每次运行都出现错误,哪位朋友懂matlab simulink仿真的帮忙看一下 修改修改 我把错误写在下面 Error in port widths or dimensions.Output port 1 of 'chenbin5/Fuzzy Logic Control simulink模糊控制的仿真 两输入一输出 纯滞后一阶惯性环节的 为什么出来是一直直线?哪里可能出现问题呢 纠了个结啊 唉 simulink仿真图怎样弄进world simulink仿真中怎么加入死区 用protues仿真电机测速电路时,出现下面的问题, 用simulink进行仿真时,出现错误,simulink中sum出错,Algebraic state in algebraic loop containing 'Lxsvpwm/Subsystem2/Sum2' computed at time 0.0 is Inf or NaN.There may be a singularity in the solution.If the model is correct,try reducing the matlab仿真时出现这是什么意思 关于matlab/simulink仿真过程出现的inf和NaN问题!Derivative input 1 of at time 0.2686788627406385 is Inf or NaN.Stopping simulation.There may be a singularity in the solution.If not,try reducing the step size (either by reducing the fixed st